Body Panels in Stock At Classic Investments

We currently have a small collection of body panels left over from 15 years of repairing, restoring, and recycling
Classic European Sports Cars.

If you haven't realized it yet, shipping these parts is expensive not because of weight but due to size.

I have worked to find some of the cheapest shipping rates around, but I am providing weights and measurements
here in case you wish to find your own. If you find a better rate please share it with me so I can use them.

Click tabs to see different Makes

Click on the images below to get a larger view.

Porsche 356A Deck Lid Good Original Topside Cosmetics Excellent. Underside has rust and Cancer on shelf area below vent grills not available new $250.00 23lbs, 36"x24"x10" Shipping will run approximately $18.00

Porsche 356 T6 Hood

In good condition

has surface rust where the paint has been broken but no cancer

hood was creased but well repaired
with reinforcement welded in

Aftermarket is $3900

$900.00
Shipping will run approximately $94.00

Hood Top

Hood Underside

Hood Reinforcement

Hood Crease

Porsche 356 T6 Deck Lid

For the 356B, 62 on and all C's

In excellent condition

No rust even inside grills where water collects

no dings or scratches

$225.00

17lbs, 40"x22"x10"
Shipping will run approximately $18.00

Porsche

MGA 1500 Drivers Front Fender Very Good Original, No Crumples, or dents in side small dents around headlight one small ding in wheel well Surface rust but no cancer Aftermarket not available new 1600 retails for $1549 $450 23lbs,64"x35"x15" Shipping will run approximately $94.00 (oversize 3)	Fender Exterior	Fender Interior
Exterior of Outside Bottom	Inside of Headlight Socket	Fender Headlight Socket
	Ding in Wheel Well	Rust on Lip Inside Rear Bottom

MGA 1500 Passenger Front Fender

Very Good Original,

No Crumples, dents or bondo
Rust just starting to bubble at
bottom rear
Cleaning should save without
patch panel

Aftermarket not available

new 1600 retails for $1549

$450

23lbs,64"x35"x15"

Shipping will run approximately $94.00 (oversize 3)

Fender Exterior

Fender Interior

Exterior of Outside Bottom

Inside of Headlight Socket

Fender Headlight Socket

Top of Fender

Rust on Lip Inside Rear Bottom

MGA 1600 Driver Front Fender Good Original No Crumples, one old dent (6") has been bondo'd Aftermarket retails for $1549 $400 23lbs,64"x35"x15" Shipping will run approximately $94.00 (oversize 3)	Fender Exterior	Fender Interior
Exterior of Outside Bottom	Inside of Headlight Socket	Fender Headlight Socket
	flip view of inside fender	6" dent previosly Bondo'd

MGA Hood

Very Good Original,
47 7/8" model
No Crumples, Folds or Rust

Includes Prop Rod and Safety Catch
spring on safety catch is strong

Aftermarket retails for $1395

$400

17lbs, 50"x25"x6"

Shipping will run approximately $36.00

MGA Hood exterior

MGA hood Interior

MGA Hood

Very Good Original,
47 7/8" model
No Crumples, Folds or Rust

Includes Prop Rod and Safety Catch
spring on safety catch is weak

Aftermarket retails for $1395

$400

17lbs, 50"x25"x6"

Shipping will run approximately $36.00

Exterior

Interior

MGA Deck Lid

(Trunk Cover for us Yanks)

Excellent Original

NO rust anywhere,
even where logo was
removed

includes Prop Rod,
hinges and latch

Not available new

$225

13lbs 32"x32"x6"

Shipping will run approximately $22

MGA Deck Lid Exterior

MGA Deck Lid Interior

MGA Deck Lid

Good Original

Drilled for Luggage Rack
fitted with aftermarket locking latch,
don't have key

no rust, several dings,

includes Prop Rod, and latch

Not available new

$175

13lbs 32"x32"x6"

Shipping will run approximately $22

MGA Deck Lid Exterior

MGA Deck Lid Interior

MGA Drivers Door (Blondes please note: This is a Front Door) Excellent Original NO Surface Rust or Cancer Not even inside door well AfterMarket sells for $890 $300.00 14 lbs, 32"x25"x8" Shipping will run approximately $21	MGA Door Outside	MGA Door Inside
MGA Door Interior	MGA Door Latch End	MGA Door Hinge End

MGB Deck Lid Good Condition Has latch that works but no key is not locked has been drilled for luggage rack No rust anywhere Was creased at prop bar Damage does not show externally $150 26lbs, 45"x32"x8" Shipping will run approximately $38	MGB Deck Lid Exterior	MGB Deck Lid Interior
	MGB Deck lid Damage, angle 2	MGB Deck Lid Damage

MGB Drivers Door Complete door with vent window frame and glass and Roll-Up Glass includes hinges and latch mechanisms Does *NOT* have typical MGB crack below the vent window does have rust spots starting to bubble at hinges and at front bottom corner Aftermarket costs $490 $175.00 25lbs, 38"x23"x8" Shipping will run approximately $26	MGB Drivers Door outside	MGB Drivers Door, Inside
MGB Drivers door latch end	MGB Drivers Door Hinge end	MGB Drivers Door, WITHOUT typical crease
MGB Drivers Door repair at lock	MGB Drivers door, rust by hinges	MGB Drivers door, rust by hinges

MGB Drivers Door Complete door including vent window frame and glass and roll-up window glass Typical MGB crack has creased but has not broken thru Aftermarket costs $490 $125.00 25lbs, 38"x23"x8" Shipping will run approximately $26	MGB Door Outside	MGB Door Interior
MGB Door Typical Crack	MGB Door Latch End	MGB Door Hinge End

MGB Passenger Door Complete Door, Good Condition Includes Roll Up Window and vent window frame and glass minor dings at lower corners from storage, has typical MGB crack under vent window Aftermarket costs $490 $125.00 25lbs, 38"x23"x8" Shipping will run approximately $26	MGB Passenger Door outside	MGB passenger Door Inside
MGB Passenger Door, typical crack	MGB Passenger Door hinge end	MGB passenger door latch

Austin Healey 100-6/3000 Hood Good Original, Steel has been sand blasted and primed Prop bar and Hinges included Inside lip material is dinged at corners Not available new in Steel. Aluminum is $900 $125.00 21lbs, 44"x34"x8" Shipping will run approximately $94.00 (oversize 3)	Front	Inside
Dinged Corner

Austin Healey 100-6/3000 Deck Lid Good Condition, was not primed after sand blasting so has mild surface rust, NO Cancer Lip on underside dinged at corners
Dinged Corner	Dinged corner #2	Dinged Corner #3

Austin Healey 100-6/3000 Front Passenger Fender

Austin Healey

Triumph TR3 Front Passenger Fender Good condition, Surface rust everyehere, NO Cancer minor crumple in wheel well. $1100.00 aftermarket $250.00 16lbs, 36"x24"x10" Shipping will run approximately $21.00

Triumph TR3 Rear Drivers Fender Good Original Surface Rust on inside no Cancer, Sofr crease at top of wheel well and ding at rear Aftermarket is $995 $275.00 13lbs 54"x26"x10" Shipping will run approximately $31.00

Triumph TR3 Hood Good Original, steel surface rust, no cancer minor dings across center For the TR2, TS4229 thru TR3, TS6000 Not Available new $175.00 30lbs, 48"x38"x8" Shipping will run approximately $94

Triumph TR3 Passenger Door

Very Good Condition

has Surface Rust, NO Cancer

includes handle and latch hardware
in working order

All metal door
fits TR3A TS60001 thru TR3B

Skin retails $167, shell not available

$75.00

15lbs, 32"x24"x6"
Shipping will run approximately $17

Triumph TR4 Driver Door Very Good Condition No Rust Anywhere No Hardware or Glass Drilled for Tonneau snaps Not available Aftermarket $150.00 25lbs, 38"x24"x10" Shipping will run approximately $22

Triumph

Alfa Romeo Guilietta Passenger Door We believe it came from a 101 (36 1/4" at longest) Very Good Condition no rust, 2 scratches no glass, no window hardware includes hinges and handle $200 25lbs, 38"x22"x10" Shipping will run approximately $22

Alpha Romeo

Classic Investments
3303 E. 42nd Avenue, Denver, CO 80216, USA
Office/Fax: (303)504-9222
Shop Phone: (303)388-9788
Check on Other Parts Here